CPD02 is especially designed for transmissions and hydraulics applications where chip size of 100µm is signal of possible bending failure. Any type of metal particles can be detected both ferromagnetic and non-ferromagnetic like gear or roller bearing metals.

Like in CPD05 the same specific feature makes the CPD02 unique and user friendly. The sensor can be remotely cleaned by the operator or the cleaning can be fully automatic depending on user requirements. All machinery even healthy ones have and generate random chips that should be cleaned in order to keep full readiness of the sensor. After cleaning, the sensor is back to normal sensing mode.

Another feature enables several particle detections even though they are fully simultaneous.

Typical sensor location is in main oil line and before filtering.

CPD02 technical data (typical gear box applications)

Sensor unit
Chip size detected: 0,2 mm and above, independent of metal magnetic characteristics
Fluid flow rate: 0,1-1,2 (l/s)
Fluid temperature: 0…+90 °C
Fluid pressure max.: 12 bar
Fluid types: hydraulic and lubrication oils, synthetic and mineral oils, solvents and most fuels
Power supply: + 24 V DC
Standby current: 10 mA
Engine oil pipeline: SAE 3000 series BSP 3/4”
Sensor unit dimensions: 140x115x80 mm
Sensor unit weight: 2 kg
Electronics unit dimensions: 240x191x107 mm
Electronics unit weight: 1,5 kg
Electronics environmental
Temperature: -40…+60 °C
Ingress protection (EN 60529): IP 65
Impact resistance (EN 62262): IK07
Digital interface options
Ethernet, TCP/IP
S 232, RS 485 Modbus, Profibus